Mechanical Job openings under Mechanical Business unit at Altran Technologies for Bangalore and Chennai locations. Please read the instructions carefully for applying for the same.
Instructions about Job openings
- Mechanical Job openings under Mechanical Business unit at Altran Technologies for experienced mechanical engineers.
- Find the relevant details below for each job opening, and apply in the link at the end of the page, if you possess relevant expertise.
- Please mention the necessary Job code as shown in the each category while applying for the job.
- If you are applying for multiple jobs, please mention all the job codes and skills you are applying for.
- If the image is not clear, check out the complete image here.
Material & Process Qualification
- Skills: Material & Process Qualification
- Experience: 3-5 Years
- Location: Bangalore
- Job code: Mech
- Job category: Hot Job
- Job Description:
- Extensive Knowledge and practical experience in Aerospace Materials
- Familiar with Metallurgical testing Mechanical testing.
- Knowledge and experience in Heat treatment process and Non Destructing test.
- Good knowledge in Material science
- Basics Knowledge of manufacturing process.
- Knowledge and experience in Product qualification.
- Strong in Engineering Basics.
- Knowledge of ISO, MIL standards.
- Good in drawing reading.
- Good experience in MS Office (knowing of macros is appreciated)
- Strong Communication Skills.
- French language will be an added advantage
- 2 to 5 years of experience in Mechanical Engineering(Preferably Aerospace Domain)
Abaqus Specialist
- Skills: Abaqus Specialist
- Experience: 3-5 Years
- Location: Bangalore
- Job code: Mech-AS
- Job category: Hot Job
- Job Description:
- Abaqus + Hypermesh skill set is must
- Nastran and any other FE tools is added advantage to use the resource for other projects
- ISAMI is added advantage
- Non-Linear analysis, Convergence study is must
- Strong FE skills & decision making related to the FE Modeling & results convergence with Composite is preferred
- Aerospace background is an added advantage
Structural Thermal analysis Expert
- Skills: Structural Thermal analysis
- Experience: 2-5 Years
- Location: Bangalore
- Job code: Mech-STA
- Job category: Hot Job
- Job Description:
- Strong in thermal basics (conduction, convection, radiation..)
- Knowledge of thermal behavior of aircraft structures
- Working experience in FE modelling (meshing concepts, boundary conditioning, results analysis..)
- Experience in massflow / HTC calculations
- Working experience in Ideas/TMG, UGNX and Nastran / Patran
- Knowledge of Macro / VBA will be an advantage
- Strong in communication skills to understand the project requirements
Flight Mechanics and Control Expert
- Skills: Flight Mechanics and Control
- Experience: 1-4 Years
- Location: Bangalore
- Job code: Mech-FM
- Job category: Standard Job
- Job Description:
- Basic Knowledge of Flight mechanics, stability and control, aerodynamics
- Knowledge on control theory
- Good Communication in English
- Onsite / Offshore working experience
- Understand / Speak French
- Stability & Control – validation and verification of Flight Control Laws, studies for validating Handling Qualities
Electrical System Installation Expert
- Skills: Electrical System Installation
- Experience: 2-4 Years
- Location: Bangalore
- Job code: Mech-ESI
- Job category: Standard Job
- Job Description:
- Should have experience working on Electrical System Installation and drawing creation
- Should have experience working on OEM 2D and 3D Methodology
- Should have experience working on Wire Routing
- Bracket and ASSY drawing creation
- Bracket Installation drawing creation experience
- ESI 2D to 3D conversion
- Should have experience working on CatiaV5,Smart 3D,VPM
CAE Engineer
- Skills: CAE Engineer
- Experience: 3-5 Years
- Location: Chennai
- Job code: Mech-CAE
- Job category: Standard Job
- Job Description:
- Create and validate the FEA model
- Debug and Solve CAE calculations of Full vehicle automotive system/ Sub system • Creating the best practice methods.
- Verify input data
- Generate or Modify FE model, model setup as per the standards
- Analysis Model setup – Load and boundary conditions.
- Check results for correctness.
- Post processing of FEA results
- Carryout Peer review for model checking
- Define the timeframe and schedule for the project Experience:
- Good knowledge of automotive FE modeling.
- Good Knowledge of Model building using Hypermesh.
- Knowledge of Non-linear analysis using Explicit solver (PAMCRASH or LS-DYNA).
- Knowledge about typical Finite Elements.
- Knowledge in FE model Quality criteria
High voltage substations Expert
- Experience: 15-20 Years
- Location: Bangalore
- Job code: Mech-HVS
- Job category: Standard Job
- Job Description:
- Will be assigned to multiple power delivery projects as a Supervising Electrical Engineer.
- Assignments will be US utility power delivery projects, mainly substation upgrades and new substations.
- On an overall basis, will provide technical guidance, review of work, and maintain schedule & budget on assigned projects. Much of the assigned work will be the development of substation single line diagrams, three line diagrams, protection & control (P&C) schematic diagrams and associated wiring drawings.
- Develop single line and three line diagrams depicting protection system schemes using ANSI symbols
- Perform detailed quality checks of wiring drawings against schematic diagrams to confirm accuracy.
- Prepare, review and/or interpret drawings, industry standards and vendor submittals.
- Assure technical accuracy and quality of all work performed for assigned projects.
- Assign and supervise personnel with the capabilities required to successfully complete the assigned tasks.
- Provide training so that new employees are indoctrinated into Altran work procedures, familiarized with Client, Altran & industry standards, and develop a commitment to quality work products.
- Monitor job performance so that personnel can be recommended for promotion or be provided with additional mentoring or training as required.
Substation Expert
- Experience: 15-20 Years
- Location: Bangalore
- Job code: Mech-ST
- Job category: Standard Job
- Job Description:
- Will be assigned to multiple power delivery projects as a Supervising Structural Engineer.
- Assignments will be US utility power delivery projects, mainly substation upgrades and new substations.
- On an overall basis, will provide technical guidance, review of work, and maintain schedule & budget on assigned projects. Much of the assigned work will be the development of substation designs for steel structures and foundations for support of electrical equipment.
- Perform detailed quality checks of structural drawings against electrical equipment arrangement plans, elevations, vendor equipment drawings and electrical components to confirm accuracy.
- Prepare, review and/or interpret drawings, industry standards and vendor submittals.
- Assure technical accuracy and quality of all work performed for assigned projects.
- Assign and supervise personnel with the capabilities required to successfully complete the assigned tasks.
- Provide training so that new employees are indoctrinated into Altran work procedures, familiarized with Client, Altran and industry standards, and develop a commitment to quality work products.
- Monitor job performance so that personnel can be recommended for promotion or be provided with additional mentoring or training as required.
Job Piping Layout Expert
- Experience: 15-20 Years
- Location: Bangalore
- Job code: Mech-PL
- Job category: Standard Job
- Job Description:
- Conducts studies and engineering analysis, including development of cost-effective solutions to complex problems related to gas turbines and associated subsystems.
- Establishes processes and equipment to satisfy client requirements.
- Specifies equipment to achieve minimal cost as well as limit field problems and change orders.
- Works with designers to develop proper arrangements, piping layout drawings and relevant subsystems and complementary systems.
- Formulates P&I Diagrams as required to describe the processes.
- Interfaces with all other disciplines and coordinates with client personnel, project management, procurement, construction management, etc.
About the company
Website: www.altran.co.in
Altran is an international group offering innovation and high-tech engineering consulting services for more than 30 years to key players in the Aerospace, Automotive, Energy, Railway, Finance, Healthcare and Telecoms sectors. Altran operates in over twenty countries throughout Europe, Asia and the Americas. Every day, we bring our clients’ most complex projects to life and we boost their performance through our expertise in technologies and innovation processes. Altran has contributed to some of the major technological advances in recent decades covering areas of: speed, precision, security, communication, practicality, interoperability, artificial intelligence, etc.
How to apply for this Job Opening?
- For more information upload your resume in Upload Resume Page with proper job code, subject and details.
- Other openings can be checked in Job Vacancies.
- Note: Only shortlisted candidates will get a call for interview.
